Import center grinder operation need to pay attention to several points
Imported internal grinder operation need to pay attention to several points:1,imported internal grinder must comply with the safe operation of mechanical cutting procedures.
2,the workpiece before processing,should be based on the workpiece material,hardness,precision,rough grinding and so on,a reasonable choice of the appropriate wheel.
3,change the wheel,according to the safety of grinding wheel operating procedures.You must carefully check the wheel size and line speed meets the requirements,the surface can not be cracked,the sound should be crisp.
4,the installation of grinding wheel,to be balanced test,first empty car test run for 10 minutes,confirm the correct before use.
5,grinding,the first vertical block iron adjust the tight,so that reciprocating sensitivity.People are not allowed to stand on the front,should stand on the side of the wheel.
6,feed,the wheel will not be allowed to touch the workpiece,to leave a gap,slowly feeding,to prevent the sudden burst of force after the wheel accident occurred.
7,the wheel does not leave the workpiece,shall not stop running.Loading and unloading workpieces,measuring precision should be stopped,the wheel back to a safe position to prevent abrasion injury.8,dry grinding of the workpiece,not suddenly converted to wet mill,to prevent wheel fragmentation.