Iron chip oil leakage phenomenon is different,so we should also depend on the situation in the treatment.The nozzle is a delicate part.If the iron chip is not clean diesel oil or the machine is used for a long time,it will return oil due to the wear and tear of the nozzle.
However,because replacing the nozzle is expensive and uneconomical,the oil can be diverted back to the tank through the return pipe or a diesel filter can be introduced in order to prevent oil leakage.If the return pipe is damaged,a piece of plastic pipe can be used to introduce the oil into the self-provided container,and then pour it back to the tank after filtration.
Second is the oil part of the oil leakage,can be separately for appropriate treatment:the pipeline hollow screw gasket is uneven,can remove the gasket,ground and then pad,such as still can not solve the problem,can replace the new gasket,or with thick soft plastic material cut into the gasket.
Plastic pipeline and metal joint oil leakage,mostly plastic pipeline hardening or cracking formation,can be cut to hardening,cracking part,and then hot hot hot hot installed on the metal joint,and then tied with metal wire;The metal pipeline breaks and leaks oil,which can be welded with brazing.In addition,in order to prevent the rupture of the pipeline,when installing the pipeline,the bend should be suitable,and the device should not be pulled hard,and the pipe body should not touch the fuselage to prevent abrasion.